40LM120-40LM200 Chilled Water Fan
The New, Versatile and Flexibility in Commercial Air Conditioning System
Features:
- Chilled Water Furred-in model with Plenum Fan Coil units.
- The low silhouette styling of this unit makes it a popular choice for the “in-the-ceiling” or “over the closet” applications in all types of building.
- Horizontal ducted application. The 40LM150 & 200 can easily be converted to vertical ducted application.
- Insulated & painted condensate drain pan and a factory fitted frame complete with filter media. (Filter media is optional for 40LM150 & 200).
- Integral filter frame capable of adapting 1” or 2” filter media for 40LM150 & 200.
- 40LM120 is standard factory supplied with 3-speed direct drive motor.
- 40LM150 & 200 is standard factory supplied with TEFC induction motor and taper lock pulleys with wedge belts
- Standard copper tube aluminium fins (Cu/Al) evaporator coil for maximum heat transfer.
- Carrier Lanced Sine Wave fin pattern ensures energy efficient performance.
- Units shall be manufactured as left-hand side (in the direction of air flow) piping connection as standard.
GUIDE SPECIFICATIONS
Furnish and install fan coil units in the location and manner shown in IOM. Units shall be suitable for use with 230V-1Ph-50Hz (40LM120) or 415V - 3Ph - 50Hz (40LM150 & 40LM200) electrical supply. The base units shall be completed with chilled water coil which equipped with connections for both supply and return line. Units shall be complete with one or more centrifugal fans, integral-high pitched condensate drain pan and galvanized steel casing panels. It shall be internally insulated on the discharge side of fan with 12.7mm polyethylene.
Coils shall be constructed with lanced sine wave aluminium plate fins mechanically bonded to 3/8" (9.5mm) copper tubing with all joints brazed. Coil shall be 4 rows deep with a nominal fin spacing of 14FPI (40LM120) and 12FPI (40LM150 & 200) Fan(s) shall be centrifugal forward curve, direct driven by a permanent split capacitor motor (40LM120) or belt driven by a totally enclosed fan cooled motor (40LM150 & 40LM200) Drain pan shall be painted galvanized steel insulated with 6.4mm thick polyethylene foam and pitch for positive drainage with unit level.
