40LM040-40LM100 Chilled Water Fan
Any Room, Every Room Flexibility in an Air Conditioning System
Features:
- Chilled Water Furred-in model with Plenum Fan Coil units.
- The low silhouette styling of this unit makes it a popular choice for ‘in-the-ceiling” or “over the closet” applications in all types of building.
- Horizontal ducted application.
- Insulated & painted condensate drain pan and a factory fitted frame complete with filter media.
- Installed with direct driven forward curved centrifugal fans and 3 speed motor ensures quiet operation.
- Standard copper tube aluminium fins (Cu/Al) evaporator coil for maximum heat transfer.
- Carrier Lanced Sine Wave fin pattern ensures energy efficient performance.
- Units shall be manufactured as left-hand side (in the direction of air flow) piping connection as standard.
Guide Specification
Furnish and install fan coil units in the location and manner shown in IOM. Units shall be suitable for use with 230V-1Ph-50Hz electrical supply. The base units shall be completed with chilled water coil which equipped with connections for both supply and return line. Units shall be complete with one or more centrifugal fans, integral-high pitched condensate drain pan and galvanized steel casing panels. It shall be internally insulated on the discharge side of fan with 12.7mm polyethylene. Coils shall be constructed with lanced sine wave aluminium plate fins mechanically bonded to 3/8" (9.5mm) copper tubing with all joints brazed. Coil shall be 2/3/4 rows deep with a nominal fin spacing of 15FPI. Fan(s) shall be centrifugal forward curve, direct driven by a permanent split capacitor motor. Drain pan shall be painted galvanized steel insulated with 6.4mm thick polyethylene foam and pitch for positive drainage with unit level.
